EcoTraq MRL Lift Specifications.
Compliance:
Meets or exceeds the requirements of the Australian Lift code AS1735.
Description:
Easy Living "Ecotraq" lift for private residences.
Capacity and Speed:
The EcoTraq Lift has a lifting capacity of 400kg
Speed of 0.30m/s to 1.0m/sec**
Floors Served and Travel:
EcoTraq Lift can service up to 7 floors with a travel distance of up to 12,000mm. This dimension is critical to +/- 25mm.
Stops and Openings:
Front/single entry and thru car configurations.
Control Cabinet:
The control system is typically located at the top floor served in a cabinet supplied by Easy Living Home Elevators. The cabinet must be located to the side or rear of the shaft.
The size of the control cabinet is 445W x 200D x 2210H mm.
Note-Cabinet is not fire rated. Additional fire separation may be required.
Power:
Single Phase
Operation:
MRL Traction lift
Control:
Automatic buttons with key isolation.
Doors:
Clear opening dimensions 900W x 2000H mm automatic doors.
Internal Car Finishes:
Car finishes are selected from the standard colour options.
Internal Car Dimensions:
1100W x 1400D mm
Can be customised to suit your application.
Car Control Features:
One Easy Living Home Elevators button panel with buttons centrally located on one sidewall. In the event of power failure, the lift will lower to the lowest floor to allow passengers to exit. This automatic emergency lowering feature is standard. The lift car lighting automatically switches off when the lift is not in use.
Passenger Protection:
Full height light ray.
Landing Buttons:
One standard call button per floor with key switch isolation.
Building Requirements:
Min Pit Depth : 200 mm
Min Head Room : 2700 mm minimum.
Shaft Size (mm)
Structure: 1830W x 1870D mm
Enclosed: 1682W x 1764D mm
WARRANTY: The lift equipment provided is covered for 1 year fully comprehensive maintenance.
Note:
** For speeds above 0.3m/sec the pit, headroom and power can vary. Please speak to Easy Living Home Elevators for more information.
Easy Living Home Elevators Pty Limited reserves the right to make changes to the above specifications and information at any time, without notice.

